HOT ! A Look at the Details｜B-546 Surface Mounted Toilet Roll Holder with Lid｜ Other Products

Threaded escutcheon conceals mounting plate, provides snug fit to the wall. Hood secured to bar with set screw. Accepts standard-core size from 20mm up to 40mm and 100mm wide. Set screw in post prevents vandalism. Escutcheon diameter 50mm. Overall width 140mm. Height 115mm. Unit projects 35mm from wall (without tissue roll).
MATERIAL

Post — 18-8, Type-304, 19mm diameter, solid stainless steel rod. Post and
Concealed Mounting Threaded Flange are machined as one piece.
Dispenser Bar — 18-8, Type-304, 9.5mm diameter, solid stainless steel rod. Secured to Post with a concealed set screw allowing for right or left handed assembly.
Retaining Pin — 18-8, Type-304, 6.4mm diameter, solid stainless steel rod press fit and secured into Dispenser Bar.
Hood — 18-8, Type-304, 18-gauge (1.2mm) stainless steel. Secured to bar with set screw.
Concealed Mounting Threaded Flange — 18-8, Type-304, 5.6mm thick, stainless steel plate with thread on outside edge for fastening cover. 46mm outside diameter with two holes for attachment to wall.
Threaded Flange Cover — 18-8, Type-304, 1.4mm (17-gauge), machined stainless steel. 49mm diameter 13mm deep. Cover fastens over mounting flange to conceal mounting screws.

INSTALLATIONFor plaster or dry wall construction, provide concealed backing to comply with local building codes, then secure unit with sheet-metal screws (not furnished). For other wall surfaces, provide fiber plugs or expansion shields for use with sheet-metal screws (not furnished), or provide 3mm (1/8") toggle bolts or expansion bolts. For partitions with particle-board or other solid core, secure with sheet-metal screws (not furnished), or provide through-bolts, nuts, and washers. For hollow-core metal partitions, provide solid backing into which the sheet-metal screws (not furnished) can be secured.
SPECIFICATIONToilet Tissue Dispenser with Hood shall be type-304 stainless steel with satin finish. Toilet Tissue Dispenser shall have 19mm diameter Post. Dispenser bar shall be 9.5mm diameter, secured to Post with a concealed set screw allowing for right or left handed assembly. Unit shall be equipped with 18-gauge (1.2mm) hood secured with set screw. Retaining pin shall be 6.4mm diameter and pressed into Dispenser bar. Concealed mounting flange shall be 5.6mm thick stainless steel plate, 46mm outside diameter and equipped with two screw holes for attachment and thread on outside edge to fasten cover. Threaded flange cover shall be 1.4mm (17-gauge) stainless steel, 49mm diameter and shall fasten over mounting flange to conceal mounting screws. Post and mounting flange are to be machined as one piece.
Brand:BobrickSKU:B-546Tags:PricefyFinish:Brushed Satin, Black